Tap Help → Open Device to see the device’s own checks and what to do.
Still stuck? Tap Settings → Advanced… → Restart assistant. Wait a few minutes.
Still stuck? Tap Settings → Reset & power… → Reboot device.
Ask a person: write to [email protected]. The person who built it answers.
Good to know
Waiting is normal when the screen shows Starting up after you plug it in (a few minutes), when you ask the first question after switching on (about two minutes), and for a normal answer (about half a minute). It is also normal when the screen says “I'm having trouble starting”: leave it plugged in. Finishing an interrupted update can take up to about 35 minutes, and then the normal screen comes back by itself. Still there after that? Write to support before disconnecting power. A power cut now counts as a failed start, and after two failed starts in a row the screen shows a repair page (see If it cannot start at all).
Do not unplug it while it answers, saves, installs an update, or says “I'm having trouble starting”. Unplugging then can make things worse.
Nothing is sent to support automatically. Read a diagnostics file before you share it.
If something goes wrong
Screen
What you see
What to do
The screen is dark
Touch it. The screen dims after a few idle minutes and wakes when you touch it.
Still dark, but it answers on your phone
On your paired phone open System & health and tap Save diagnostics. Then write to support. Do not cut the power during an update or while it saves.
Locked
Enter your device password. Do not use the recovery-code link: it erases the device.
The text is too small
Settings → Voice, screen and language → Text size → Large → Save.
“My storage has stopped saving changes.”
Write to support before you change anything.
Sound and voice
What you see
What to do
No sound
Check the volume slider at the top of the Settings menu. Check that the speaker is plugged in. Then open Settings → Voice, screen and language: set Voice to Speaks and tap Hear it next to Speaker.
It does not hear you
Check that the USB microphone is plugged in. Device → Overview says “I can’t see a microphone” when it is missing.
Wrong words appear
Speak a little closer and slower. Fix the words in the box before you tap Send.
It talks on its own too often
Settings → Voice, screen and language → Spoken notices → Important or Never.
Network and phone
What you see
What to do
“no internet” or “Local only”
Everything on the device keeps working. Check your router. See Without internet.
Your phone cannot reach the device
Phone and device must be on the same home network. Guest Wi-Fi often blocks this. Use the address shown on Home next to This device.
The phone warns about the connection
This is normal the first time. Compare the fingerprint with the device screen; see Pair your phone.
The clock is wrong
This includes “clock not set yet”. Connect to the internet, or set it by hand: Settings → Voice, screen and language → Date & time (asks for your device password).
Answers slow or wrong
What you see
What to do
The first answer is slow
Right after switching on, it can take about two minutes. Later answers are faster.
Answers stop coming
Settings → Advanced… → Restart assistant.
The answer is wrong
It is a small AI and makes mistakes. Mark the answer; see Mark a wrong answer. Check important answers yourself.
A save “was not confirmed”
Look for the saved item before you try again.
After switching on
What you see
What to do
Starting up with a list of checks
Wait. It clears by itself after a few minutes.
“I'm having trouble starting”
Leave it plugged in and wait. The device cannot answer until its start-up recovery has finished (up to about 35 minutes after an interrupted update). Still there after that? Write to support.
“PHNTM One could not start.”
The screen shows this repair page after two failed starts in a row. Follow the steps on the page; see If it cannot start at all.
From the device manual for software 0.9.0 (November 15, 2026). Your device serves the manual for its installed software; where this copy and your device differ, your device is right.