Pair your phone

Use the device from your phone's web browser, on your home network.

How to

Pair a phone

  1. Put the phone on the same Wi-Fi as the device.
  2. On the device, tap Settings, then Show pairing code. Enter the device password.
  3. Scan the QR code with the phone's camera and open the link.
  4. The first time, the phone's browser warns that the connection is not verified. See Check the phone connection below.
  5. The phone shows a 6-digit code and waits for approval.
  6. The device asks Allow this phone?. Check that both screens show the same code.
  7. Tap Allow. If it is not your phone, tap Deny.

A private chat then opens in the phone's browser. The request expires after 10 minutes.

Remove a phone

On the device, open Device, then Connect. Under Paired phones and browsers, tap Unpair and enter the device password. To sign out from the phone itself, open More → Sign out on this phone or browser.

Good to know

If something goes wrong

What you seeWhat to do
The phone says “The device did not allow this phone.”Someone tapped Deny. Show the pairing code and scan again.
The phone says “This request expired. Scan a new code on the device.”More than 10 minutes passed. Show the pairing code again and scan it.
Nothing happens after scanning.Check that the phone and the device are on the same Wi-Fi. On the pairing screen, open Problems connecting?.
The browser warns that the connection is not private.This is expected the first time. Follow Check the phone connection.

Privacy

The phone talks straight to the device over your home network, encrypted (HTTPS), with no cloud in between. The phone app works only on your home network, not from the internet.

More detail

Check the phone connection

The first time a phone or browser opens the private chat, the browser says the connection is not verified. The pairing screen shows the start of the device's certificate fingerprint. Continue only if the fingerprint your browser shows starts the same way.

Want it verified every time? On the phone, open the certificate address the pairing screen shows (it ends in /device-ca.crt) and install it. Then use the device's .local address. This certificate is limited to this one device's name, so installing it trusts this device and nothing else.

Related topics

From the device manual for software 0.9.0 (November 15, 2026). Your device serves the manual for its installed software; where this copy and your device differ, your device is right.