Factory reset

Erase everything and start the device again, like new.

How to

Erase everything

  1. Tap Settings (top right), then Reset & power….
  2. Tap Factory reset….
  3. Read the list of what will be erased.
  4. Type ERASE in the box Type ERASE to confirm.
  5. Tap Erase everything.
  6. Enter your password. The box may be titled This computer’s login password: that is the password you use for the device itself. Or tap Forgot your password? Use your recovery code and type the code.
  7. The device erases everything and restarts into setup.

If you lost both your password and your recovery code

  1. Unplug PHNTM One.
  2. Put a finger on the screen and keep it there.
  3. Plug the power back in. Keep holding for about 15 seconds.
  4. When the device has started, it asks Erase everything and start over?. Tap Erase everything.
  5. Type ERASE and tap Erase everything again.

This offer lasts ten minutes. It works only at the device’s screen, never from a phone or computer.

Good to know

If something goes wrong

What you seeWhat to do
Factory reset did not runNothing was erased. Read the message, then try again from Settings.
That erase didn't finish when setup opensA power cut stopped the erase. Tap Finish erasing.
“Too many wrong device checks…”Use your recovery code instead of the password.

If it cannot start at all. After two failed starts in a row, the screen shows a repair page: “PHNTM One could not start.” Follow the steps on that page:

  1. Unplug the power.
  2. Put a finger on the screen and keep it there.
  3. Plug the power back in.
  4. Keep holding for about 15 seconds, then let go.

PHNTM One then reinstalls the last version that worked, from a copy it keeps. Your conversations, notes, documents and settings are kept. The repair takes several minutes and the screen may stay dark meanwhile. Do not unplug it.

If that did not help, the page changes. It says reinstalling did not fix it, and offers to erase everything. There is no button to tap: to choose the erase, do the same hold again at the next power-on. On a device without encryption at rest, the page offers no erase and asks you to contact support.

If the repair page says the encrypted memory could not be unlocked. This page erases nothing and changes nothing. Unplug the power, wait ten seconds and plug it back in once. If the page comes back, holding the screen does nothing here. Write to [email protected] with the serial from the business card. Keep your recovery code at hand, but do not send it.

Privacy

With encryption at rest, a reset also destroys the key to the old data, so nothing left on the card can be read (pieces from before the unit was first encrypted are not covered; see Encryption at rest). Without encryption at rest, a reset is not a forensic erase: a lab could recover pieces from the card. Giving away such a unit? Contact support. A reset never erases a USB stick: erase backups on a stick yourself if you need to.

Related topics

From the device manual for software 0.9.0 (November 15, 2026). Your device serves the manual for its installed software; where this copy and your device differ, your device is right.