Hello Phantom
Ask a general question hands-free, by saying “Hello Phantom”.
How to
Turn it on
- Tap the gear button (Settings), then Wake word: say “Hello Phantom”.
- Choose Enable wake detection.
- Tap Apply.
Ask a question
- Say Hello Phantom.
- Wait for the short sound and Listening · ask your question.
- Ask your question. You can pause to think: it stops listening after about five seconds of quiet.
- The screen shows Heard: … with the words it heard, then the answer.
Test it or turn it off
- Open Settings → Wake word: say “Hello Phantom” again.
- Choose Test phrase for 20 seconds to check that it hears you, or Turn wake detection off.
- Tap Apply.
Good to know
- It is off until you turn it on.
- The phrase “Hello Phantom” must be said in English. You can ask the question in Italian or Spanish; it answers in that language.
- Hands-free answers are general. They do not use your memories, documents or notes, and they cannot do things for you.
- Similar-sounding words can wake it. Noise or distance can make it miss you. It does not know who is speaking.
- It pauses while the device speaks, while you record, during setup and maintenance, and while a child's protected lesson is on the screen.
- Kitchen and Workshop each have their own hands-free controls, which you start yourself.
If something goes wrong
| What you see | What to do |
|---|---|
| An error sound, and it says it could not hear or answer | Say “Hello Phantom” again, a little closer. |
| “Microphone unavailable · check the USB microphone.” | Check that the USB microphone is plugged in. |
| It wakes up by mistake | Turn it off. Talk and Notes still work. |
Privacy
When it is on, the microphone listens all the time for the phrase, on the device only. Sound around it is never saved or sent online. Your question and its answer are kept in History like other conversations, and erased with it. Turning it off is a software switch; to be certain, unplug the USB microphone. The unit has no other microphone.
Related topics
From the device manual for software 0.9.0 (November 15, 2026). Your device serves the manual for its installed software; where this copy and your device differ, your device is right.